PORCELAIN TILE CUTTING
Due to the dense nature of porcelain and hardness of the body, it is recommended to use a wet saw with a diamond-tipped blade to achieve precise cuts.
A 5mm grout joint (or approximately 3/16”) is recommended for a staggered tile placement, we recommend using a maximum of 30% offset.
We strongly discourage 50% offset installations.
If specified brick pattern with 50% pattern is mandatory, a bigger grout joint is recommended to hide imperfections of installation (minimum ¼”)
Not modular with nominal pressed material.
Not recommended for exterior horizontal applications.
Not recommended for wet areas or where standing water may accumulate.